Firmware Downloads
3 Bit Fuzz
Latest Version
Release Date: January 27th 2026
Download Now
Release History
3 Bit Fuzz - January 27th 2026
- Fix issue causing Dry Blend to not be affected by the Volume knob.
3 Bit Fuzz - November 24th 2025
- Adjustable Expression pedal range.
- Supports 2-way Web Editor communication.
- Added overdrive block which tightens up midrange, less crackles in the top end.
- Added clean blend control
3 Bit Fuzz - September 25th 2025
- Initial Release of 3 Bit Fuzz effect.
Amverb
Latest Version
Release Date: March 12th 2026
Download Now
Release History
- Complete re-write of the firmware.
- Based on Alesis Midiverb II as opposed to the original Midiverb.
- 16 Bit processing (instead of 12 bit).
- Lower noise floor, better algorithms.
- Legendary "Bloom" algorithms included.
- Added a pre-delay parameter with up to 500ms of additional delay.
- Final Release of the original Firmware (based on the original Alesis Midiverb)
- Less noise when Hi shelf EQ is engaged.
- Added a gate to the reverb algorithm output to reduce noisy artifacts when no input is present (can be controlled via advanced parameter)
- Change Input gain to allow up to 12dB boost
- Adjustable Expression pedal range.
- Supports 2-way Web Editor communication.
- EQ section moved after reverb algorithm
- Adjustable Input boost via Web Editor
- Initial Release of Amverb effect.
Swirls
Latest Version
Release Date: March 7th 2026
Download Now
Release History
- Fix issue causing commands to be dropped when Midi timecode is being transmitted.
- Adjustable Expression pedal range.
- Supports 2-way Web Editor communication.
- Analog dry-thru path.
- Allow changing compressor settings through Web Editor.
- Fixed incorrect mixing curve for chorus and micro-pitch which caused output volume to increase excessively when increasing the mix.
- Compressor has been significantly overhauled
- Responds faster to very loud transients, similar to dbx 160x
- Soft-saturation on output reduces harshness of loud peaks
- Softer compression curve "knee".
- Significantly improved playability and responsiveness.
- Initial Release of Swirls effect.
Daedalus Firmware
To update the firmware
- Disconnect the pedal from both USB and the power supply, and ensure the pedal is off.
- Hold down the black button on the middle of the pedal.
- While still holding down the button, connect the pedal to your computer with a USB-C cable.
- The pedal should connect to your computer as a "USB Storage Device", and appear in Finder (MacOS) / Explorer (Windows).
- Copy the .uf2 file across to the USB device.
- Once the copy is complete, the device will abruptly disconnect from the computer (this can cause an error to pop up on screen, but this is normal).
- The pedal should now reset itself and start running the new firmware.