Product Details - Forged In Code

Download Free Sampler Pack

To help your purchasing decision, we are providing a FREE sampler pack, containing 10 cherry picked impulse responses from the collection.

Download Free Sampler Pack Here

Technical Details

All IRs are provided at the following sampling rates:

  • 44.1Khz
  • 48Khz

The length of each impulse response is between 1800 and 2048 samples.

Please load the samples from the appropriate directory for your DAW project or hardware unit. Refer to the use manual of your hardware unit for details on which sample rates it supports. But here is a short list of the most common units, and the sample rate to use:

  • AxeFX II/III - 48Khz
  • Line 6 Helix / Pod Go - 48Khz
  • Neural DSP Quad Cortex - 48Khz
  • Kemper Profiling Amp - 44.1Khz
  • Mooer GE series - 44.1Khz

File Structure

Each of the 33 unique impulse responses is provided in 10 different variations, as well as its original form, for a total of 363 files. I refer to the technique used to produce these variants as “transmutation”.

Transmutated variants will have a “TMx” suffix on the file, and are located in a separate folder from the originals (labelled TM0).

Files labelled “TMxh” have been mutated at half strength, so they have a 50/50 blended curve between the original and target response.

Transmutation

The process involves splitting an impulse response into two components:

Macro vs. Microscopic

  • Macroscopic EQ - The overall EQ curve. This is the tone adjustment that represents the overall bass, mid and treble response of the impulse response. It is similar to the adjustment you can make using a traditional EQ.
  • Microscopic response - the finer details, the phase notches, dips and resonances, caused by the specific combination of speaker, microphone and mic placement, which all come together to give the impulse response its specific flavour. This is what really makes a speaker cab impulse sound the way it does.

By splitting an IR into these two components, we can then experiment with mixing and matching elements from different IRs, combining them in ways that simple linear mixing could not achieve.

For this IR pack, I've taken five of my all-time favourite impulse responses, extracted their macroscopic EQ profile, and combined them with the detailed response of the synthetic impulse responses.

TM1 - Unspecified Celestion speakers, mic’ed with a pair for SM57s using the Fredman configuration.

TM2 - My (previous) all-time favourite impulse response, containing a mixture of microphones and a 4×12 cabinet loaded with early 2000s Celestion Vintage 30s.

TM3 - Another Vintage 30 4×12 with a slightly different flavour.

TM4 - A Friedman cab with a blend of speakers and microphones.

TM5 - 2×12 cabinet with a combination of Vintage 30 and a Celestion Greenback speaker.

FAQ

Q: There are no descriptions! How can I tell what each IR will sound like? 

A: You can't. Since they are all synthetic, there is no way to categorize them by microphone choice, speaker or position used to capture it... because it wasn't captured. Each IR is completely unique. You'll just have to use your ears and experiment.

Q: Can I mix these IRs with other impulses from different manufacturers?

A: Certainly. They are all minimum phase transformed, and should mix without any phasing issues.